| Fogstar Power Jet |
| |
| Machine Performance Specification |
| Ultra Fine Aerosole Generation: In Submicron Size(vapour like Fog) |
|
| Reach |
Unltra High Power Jetair Walts
High thrust Air Impeller Fan System
Greater Spread And Reach-40 Ft Distance & 20-25ft Height. |
|
|
| |
| Technical Specification |
| |
| Input Power |
| 220VAC, 4Amp 50hz. |
|
| Nozzle Assembly |
Non rotating, Non clogging, Vortex design.
MOC-ENGG. Plastics |
|
|
| Power Head Housing |
| 2High Grade Engg.Plastic Tough & Corrosion Resistant Bolts,Washer-ss304 |
|
| Motor Assembly |
High Thrust Double Impeller Motor
Inbuilt Circuit For Thermal Overload Protection
Motot Mounting Ring-SS304 |
|
|
| Precision Metering System |
Liquid Discharge Rate:0-150 mt/min
Adjustable By Rotating Knob.
Valve Stem/Insert-SS304
Body/Barel/Nut Engg.PLastic,
Liquid Line Connectors/Strainer & Wiremesh-SS304 |
|
| Chemical Solution Tank |
Tank Capacity - 5 Litres
Moc-HDPE, Non Corrosive
Tank with Graduated Marking & Liquid Level Visibility From Outside. |
|
|
| Intake Air Filter |
Primary And Secondary Layer of Filtration For Particulate malter and Moisture.
Empty Weight :5.2kgs |
| |
| Ionizer |
|
| |
| The generation and accumulation of unwanted electrostatic charges, both surface and airborne, poses a serious problem in various industries and laboratories. For instance, static charges can create havoc with sensitive equipment and electronic components. |
|
| This Bench Top Instrument is designed to neutralise your ESD work-station or ESD protected area with a stream of ionized air. It does what Wrist straps and conductive mats cannot do- i.e remove static charges from non-conductive objects and surfaces. |
|
| It is able to rapidly neutralise potentially dangerous charges in a localised area. An axial fan gives the desired air flow to neutralise static on specific objects rapidly, as well as control static in the general area in front of the Ionizer. |
|
| This is a powerful, trouble free and compact solution to static control problems anywhere. The unique high efficiency ionization pulse circuitry provides fast discharge with minimum air flow. A high air flow would lead to operator discomfort and may also disturb small components. |
|
| This static eliminator works on the principle of high voltage corona discharge to produce the neutralising Ions. It is designed for continuous use and a current limitor circuit ensures operator safety even if the ion emitters are accidentally touched. It is available in 2 models: Standard Z206 & Self-balancing Z207. The latter has special circuitry to ensure an accurate balance in output of Negative and Positive Ions. This is essential to ensure that no net charge is induced by the ion shower. Balance is maintained irrespective of supply voltage and even if the discharge electrodes are dirty. Balanced output is essential when used in ESD protected areas. |
|
| Application Areas |
-
Anti-static work stations and assembly units.
-
Plastic film and paper Industries
-
Plastic manufacturing and moulding units.
-
Clean Rooms.
-
Pharmaceutical Industry.
|
| Air Flow |
1.8 cu m/min |
| Noise Level |
45 dbA (at 1 m) |
| Supply |
230 V AC 50 Hz 20 watts |
| Ionization Voltage |
6-8 KV |
| Ion Balance |
-/+ 50 V (in self-balanced model) |
| Construction |
Powder coated MS Cabinet |
| Dimensions in mm |
200 x 170 x 110 |
| Weight |
2.75 kgs |
| Warranty |
One year |
|
| |
